- CG MotorsportHome
- Peugeot
- Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit
{"tags":["1.4 HDi DV4TD-8HZ Engine","1.6 16v Hdi 110 HP-Models to September 2006","1.6 Hdi 110HP Fitted With Sachs Flywheel-September 06 Onwards","1.6 HDi 110Hp-2004 Models","2.0 HDi 110Hp Models to May 2006","2.0 HDi 135hp models from October 2006","2.0 HDi 135HP Models to September 2006","2.0HDi 16vDW10ATED-L3-DW10ATED4-DW10BTED-W3-DW10CTED (95>2003)","2.0HDi 16vDW10ATED4","2.0HDi 16vDW10ATED4-DW10BTED (04>2006)","2.0HDi DW10ATED-F(2004>)","2.0HDi DW10ATED-F-DW10ATED-L3-DW10ATED-L4(99>2004)","2.0HDi DW10ATED-F-DW10ATED-L4(2000>2004)","2.0HDi DW10ATED-L3-DW10ATED4","2.0HDi DW10ATED-L4","2.2HDi 16v DW12TED4-L4 (2000>)","2.2HDI 16V DW12TED4-L4","2.2HDi 16vDW12TED4-L4","206","207","307","406","607","806","807","Expert E7 Taxi","Expert MK2 E7 Taxi","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"]}
Select Make
- Alfa Romeo355
- Alfa Romeo356
- Audi1325
- BMW719
- Brake Pads39
- Citroen340
Filter
Type
Clear
- 101 Series Racing Drive Plate Only
- 385 Series Supersport Clutch Kit
- 425 Series Supersport Clutch Kit
- 666 Organic Lucky Devil Race Clutch and Flywheel
- 777 Ceramic Lucky Devil Race Clutch and Flywheel
- 888 Series 184 Supersport Race Twin Plate Clutch Kit with Flywheel
- Clutch and Flywheel 18
- Drive Plate Only
- Dual Friction Drive Plate Only
- Dual Friction Performance Clutch Kit
- Flywheel Only
- Kevtek Drive Plate Only
- Lightened and Balanced Flywheel Only
- Paddle Drive Plate Only
- Performance Clutch Kits
- Replacement 184mm Sintered 2.6mm Twin Disc Drive Plate Only
- Replacement Ceramic 7.1mm Thick Twin Disc Drive Plate Only
- Solid Mass Flywheel Conversion Kit 18
- Solid Mass Flywheel Conversion Kit with Exclusive Dual Friction Clutch Kit
- Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit 18
- Stage 1 Performance Clutch Kits
- Stage 2 Performance Clutch Kits
- Stage 3 Performance Clutch Kits
Your Vehicle: Peugeot | Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit | Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit
Change your vehicle
All 18 results
View
Filter
Type
Clear
- 101 Series Racing Drive Plate Only
- 385 Series Supersport Clutch Kit
- 425 Series Supersport Clutch Kit
- 666 Organic Lucky Devil Race Clutch and Flywheel
- 777 Ceramic Lucky Devil Race Clutch and Flywheel
- 888 Series 184 Supersport Race Twin Plate Clutch Kit with Flywheel
- Clutch and Flywheel
- Drive Plate Only
- Dual Friction Drive Plate Only
- Dual Friction Performance Clutch Kit
- Flywheel Only
- Kevtek Drive Plate Only
- Lightened and Balanced Flywheel Only
- Paddle Drive Plate Only
- Performance Clutch Kits
- Replacement 184mm Sintered 2.6mm Twin Disc Drive Plate Only
- Replacement Ceramic 7.1mm Thick Twin Disc Drive Plate Only
- Solid Mass Flywheel Conversion Kit
- Solid Mass Flywheel Conversion Kit with Exclusive Dual Friction Clutch Kit
- Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit
- Stage 1 Performance Clutch Kits
- Stage 2 Performance Clutch Kits
- Stage 3 Performance Clutch Kits
{"id":4381963223151,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 206 1.6 16v Hdi 110 HP - Models to September 2006","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0471","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:38+00:00","created_at":"2020-02-11T14:01:40+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["1.6 16v Hdi 110 HP-Models to September 2006","206","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291941257327,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0471","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 206 1.6 16v Hdi 110 HP - Models to September 2006","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_fe4a3d7e-e253-487f-acf7-acacb7b076cb.jpg?v=1581429700"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_fe4a3d7e-e253-487f-acf7-acacb7b076cb.jpg?v=1581429700","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839820456047,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_fe4a3d7e-e253-487f-acf7-acacb7b076cb.jpg?v=1581429700"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_fe4a3d7e-e253-487f-acf7-acacb7b076cb.jpg?v=1581429700","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4381963190383,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 207 1.4 HDi DV4TD \/ 8HZ Engine","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0476","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:36+00:00","created_at":"2020-02-11T14:01:38+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["1.4 HDi DV4TD-8HZ Engine","207","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291941224559,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0476","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 207 1.4 HDi DV4TD \/ 8HZ Engine","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0e24d108-f65c-4685-8680-e81dd7fa80b7.jpg?v=1581429698"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0e24d108-f65c-4685-8680-e81dd7fa80b7.jpg?v=1581429698","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839820357743,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0e24d108-f65c-4685-8680-e81dd7fa80b7.jpg?v=1581429698"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0e24d108-f65c-4685-8680-e81dd7fa80b7.jpg?v=1581429698","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4381963157615,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 207 1.6 Hdi 110HP Fitted With Sachs Flywheel - September 06 Onwards","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0479","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:35+00:00","created_at":"2020-02-11T14:01:36+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["1.6 Hdi 110HP Fitted With Sachs Flywheel-September 06 Onwards","207","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291941191791,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0479","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 207 1.6 Hdi 110HP Fitted With Sachs Flywheel - September 06 Onwards","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_71994568-aacc-4f25-b85a-a83da192a90b.jpg?v=1581429696"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_71994568-aacc-4f25-b85a-a83da192a90b.jpg?v=1581429696","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839820259439,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_71994568-aacc-4f25-b85a-a83da192a90b.jpg?v=1581429696"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_71994568-aacc-4f25-b85a-a83da192a90b.jpg?v=1581429696","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4381963124847,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 1.6 HDi 110Hp - 2004 Models","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0492","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:32+00:00","created_at":"2020-02-11T14:01:34+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["1.6 HDi 110Hp-2004 Models","307","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291941159023,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0492","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 1.6 HDi 110Hp - 2004 Models","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_58ecbeca-67e0-4b82-b066-2cb2a86b0a12.jpg?v=1581429694"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_58ecbeca-67e0-4b82-b066-2cb2a86b0a12.jpg?v=1581429694","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839820161135,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_58ecbeca-67e0-4b82-b066-2cb2a86b0a12.jpg?v=1581429694"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_58ecbeca-67e0-4b82-b066-2cb2a86b0a12.jpg?v=1581429694","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4381963026543,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0 HDi 110Hp Models to May 2006","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0496","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:30+00:00","created_at":"2020-02-11T14:01:31+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0 HDi 110Hp Models to May 2006","307","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291941060719,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0496","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0 HDi 110Hp Models to May 2006","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_479377db-b2f5-4037-a4d9-6fd6a512c742.jpg?v=1581429692"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_479377db-b2f5-4037-a4d9-6fd6a512c742.jpg?v=1581429692","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839819997295,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_479377db-b2f5-4037-a4d9-6fd6a512c742.jpg?v=1581429692"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_479377db-b2f5-4037-a4d9-6fd6a512c742.jpg?v=1581429692","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4381962993775,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0 HDi 135HP Models to September 2006","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0497","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:28+00:00","created_at":"2020-02-11T14:01:29+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0 HDi 135HP Models to September 2006","307","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291941027951,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0497","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0 HDi 135HP Models to September 2006","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5206ab7a-cf11-457e-b405-eabec6eba776.jpg?v=1581429690"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5206ab7a-cf11-457e-b405-eabec6eba776.jpg?v=1581429690","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839819931759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5206ab7a-cf11-457e-b405-eabec6eba776.jpg?v=1581429690"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5206ab7a-cf11-457e-b405-eabec6eba776.jpg?v=1581429690","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4381962961007,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0 HDi 135hp models from October 2006","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0498","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2020-02-11T14:01:26+00:00","created_at":"2020-02-11T14:01:27+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0 HDi 135hp models from October 2006","307","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":88090,"price_min":88090,"price_max":88090,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31291940995183,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0498","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0 HDi 135hp models from October 2006","public_title":null,"options":["Default Title"],"price":88090,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0a14c0b4-fc7a-4118-adad-cde77caef60f.jpg?v=1581429688"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0a14c0b4-fc7a-4118-adad-cde77caef60f.jpg?v=1581429688","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":5839819866223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0a14c0b4-fc7a-4118-adad-cde77caef60f.jpg?v=1581429688"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_0a14c0b4-fc7a-4118-adad-cde77caef60f.jpg?v=1581429688","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}
{"id":4138194993263,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit for Peugeot Expert MK2 E7 Taxi 2.0HDi 16v DW10ATED4-DW10BTED (04\u003e2006)","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0462","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:02:03+01:00","created_at":"2019-09-27T13:02:03+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi 16vDW10ATED4-DW10BTED (04\u003e2006)","Expert MK2 E7 Taxi","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219349615,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0462","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit for Peugeot Expert MK2 E7 Taxi 2.0HDi 16v DW10ATED4-DW10BTED (04\u003e2006)","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ef41914f-44a8-45d2-b93b-620462263b2c.jpg?v=1569585723"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ef41914f-44a8-45d2-b93b-620462263b2c.jpg?v=1569585723","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714313327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ef41914f-44a8-45d2-b93b-620462263b2c.jpg?v=1569585723"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ef41914f-44a8-45d2-b93b-620462263b2c.jpg?v=1569585723","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194960495,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot Expert E7 Taxi 2.0HDi 16v DW10ATED-L3-DW10ATED4-DW10BTED-W3-DW10CTED (95\u003e2003)","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0461","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:02:02+01:00","created_at":"2019-09-27T13:02:02+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi 16vDW10ATED-L3-DW10ATED4-DW10BTED-W3-DW10CTED (95\u003e2003)","Expert E7 Taxi","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219316847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0461","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot Expert E7 Taxi 2.0HDi 16v DW10ATED-L3-DW10ATED4-DW10BTED-W3-DW10CTED (95\u003e2003)","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ae610ca8-10c2-4341-9031-bef4b1a45226.jpg?v=1569585722"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ae610ca8-10c2-4341-9031-bef4b1a45226.jpg?v=1569585722","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714280559,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ae610ca8-10c2-4341-9031-bef4b1a45226.jpg?v=1569585722"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_ae610ca8-10c2-4341-9031-bef4b1a45226.jpg?v=1569585722","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194927727,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 807 2.2HDi 16v DW12TED4-L4","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0515","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:02:01+01:00","created_at":"2019-09-27T13:02:01+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.2HDi 16vDW12TED4-L4","807","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219284079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0515","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 807 2.2HDi 16v DW12TED4-L4","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_eafdcabc-abad-44f4-8bc8-0e63613efd61.jpg?v=1569585721"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_eafdcabc-abad-44f4-8bc8-0e63613efd61.jpg?v=1569585721","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714247791,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_eafdcabc-abad-44f4-8bc8-0e63613efd61.jpg?v=1569585721"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_eafdcabc-abad-44f4-8bc8-0e63613efd61.jpg?v=1569585721","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194894959,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit Peugeot 807 2.0HDi 16v DW10ATED4","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0514","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:59+01:00","created_at":"2019-09-27T13:02:00+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi 16vDW10ATED4","807","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219251311,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0514","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit Peugeot 807 2.0HDi 16v DW10ATED4","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5a64b352-d0f9-4668-9b6b-c2142cde2820.jpg?v=1569585720"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5a64b352-d0f9-4668-9b6b-c2142cde2820.jpg?v=1569585720","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714215023,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5a64b352-d0f9-4668-9b6b-c2142cde2820.jpg?v=1569585720"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_5a64b352-d0f9-4668-9b6b-c2142cde2820.jpg?v=1569585720","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194829423,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 806 2.0HDi DW10ATED-L3-DW10ATED4","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0512","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:57+01:00","created_at":"2019-09-27T13:01:58+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi DW10ATED-L3-DW10ATED4","806","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219185775,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0512","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 806 2.0HDi DW10ATED-L3-DW10ATED4","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_7301c2a6-415c-4b49-8589-158f7a763565.jpg?v=1569585718"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_7301c2a6-415c-4b49-8589-158f7a763565.jpg?v=1569585718","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714149487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_7301c2a6-415c-4b49-8589-158f7a763565.jpg?v=1569585718"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_7301c2a6-415c-4b49-8589-158f7a763565.jpg?v=1569585718","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194763887,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 607 2.0HDi DW10ATED-F (2004\u003e)","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0510","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:55+01:00","created_at":"2019-09-27T13:01:55+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi DW10ATED-F(2004\u003e)","607","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219120239,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0510","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 607 2.0HDi DW10ATED-F (2004\u003e)","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_d0e83699-a7e1-4f3d-8a58-3af4de298490.jpg?v=1569585716"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_d0e83699-a7e1-4f3d-8a58-3af4de298490.jpg?v=1569585716","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714083951,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_d0e83699-a7e1-4f3d-8a58-3af4de298490.jpg?v=1569585716"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_d0e83699-a7e1-4f3d-8a58-3af4de298490.jpg?v=1569585716","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194731119,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 607 2.2HDi 16v DW12TED4-L4 (2000\u003e2004)","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0509","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:54+01:00","created_at":"2019-09-27T13:01:54+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.2HDi 16v DW12TED4-L4 (2000\u003e)","607","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219087471,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0509","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 607 2.2HDi 16v DW12TED4-L4 (2000\u003e2004)","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_2b35f5c1-ecde-41ef-af85-1dbbc78d8ed7.jpg?v=1569585714"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_2b35f5c1-ecde-41ef-af85-1dbbc78d8ed7.jpg?v=1569585714","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714051183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_2b35f5c1-ecde-41ef-af85-1dbbc78d8ed7.jpg?v=1569585714"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_2b35f5c1-ecde-41ef-af85-1dbbc78d8ed7.jpg?v=1569585714","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194698351,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 607 2.0HDi DW10ATED-F-DW10ATED-L4 (2000\u003e2004)","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0508","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:53+01:00","created_at":"2019-09-27T13:01:53+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi DW10ATED-F-DW10ATED-L4(2000\u003e2004)","607","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219054703,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0508","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 607 2.0HDi DW10ATED-F-DW10ATED-L4 (2000\u003e2004)","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_04766207-8dce-4552-8e56-af0805eec6b5.jpg?v=1569585713"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_04766207-8dce-4552-8e56-af0805eec6b5.jpg?v=1569585713","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565714018415,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_04766207-8dce-4552-8e56-af0805eec6b5.jpg?v=1569585713"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_04766207-8dce-4552-8e56-af0805eec6b5.jpg?v=1569585713","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194665583,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 406 2.0HDi DW10ATED-F-DW10ATED-L3-DW10ATED-L4 (99\u003e2004)","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0507","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:51+01:00","created_at":"2019-09-27T13:01:52+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi DW10ATED-F-DW10ATED-L3-DW10ATED-L4(99\u003e2004)","406","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291219021935,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0507","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 406 2.0HDi DW10ATED-F-DW10ATED-L3-DW10ATED-L4 (99\u003e2004)","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_51c5d296-567a-43db-8d6a-1e1fec80cdf2.jpg?v=1569585712"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_51c5d296-567a-43db-8d6a-1e1fec80cdf2.jpg?v=1569585712","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565713985647,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_51c5d296-567a-43db-8d6a-1e1fec80cdf2.jpg?v=1569585712"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_51c5d296-567a-43db-8d6a-1e1fec80cdf2.jpg?v=1569585712","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138194632815,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0HDi DW10ATED-L4","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-1486","description":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e","published_at":"2019-09-27T13:01:50+01:00","created_at":"2019-09-27T13:01:51+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.0HDi DW10ATED-L4","307","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291218989167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-1486","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 307 2.0HDi DW10ATED-L4","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_52701517-8c79-47d4-bbe3-7cfbf45a28e1.jpg?v=1569585711"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_52701517-8c79-47d4-bbe3-7cfbf45a28e1.jpg?v=1569585711","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565713887343,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_52701517-8c79-47d4-bbe3-7cfbf45a28e1.jpg?v=1569585711"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_52701517-8c79-47d4-bbe3-7cfbf45a28e1.jpg?v=1569585711","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eCG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit\u003c\/h4\u003e\n\u003cp\u003eThe Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003eHigh burst strength Kev-Tek material Allows for an increase in stock torque up to 30%*\u003c\/li\u003e\n\u003cli\u003eSmooth engagement and an extended life with Kev-TEK material\u003c\/li\u003e\n\u003cli\u003eWill allow much more aggressive driving and gear changes\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eSports feel, but still suitable for road use.\u003c\/li\u003e\n\u003cli\u003eWhere applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 500 mile break in is recommended with this kit.\u003c\/p\u003e\n\u003cp\u003ePlease email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n\u003cp\u003eYou may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder.\u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e"}
{"id":4138190176367,"title":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 406 2.2 Hdi - DW12TED4 Engine Code - ML5T Transmission","handle":"cg-motorsport-solid-mass-conversion-kit-with-kevtek-clutch-kit-620-0505","description":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n","published_at":"2019-09-27T12:59:28+01:00","created_at":"2019-09-27T12:59:28+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Solid Mass Flywheel Conversion Kit","tags":["2.2HDI 16V DW12TED4-L4","406","Peugeot","Type_Clutch and Flywheel","Type_Solid Mass Flywheel Conversion Kit","Type_Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30291214073967,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"620-0505","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit For Peugeot 406 2.2 Hdi - DW12TED4 Engine Code - ML5T Transmission","public_title":null,"options":["Default Title"],"price":79900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_a34a44cb-f251-4baf-9f24-7be3e83b984d.jpg?v=1569585569"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_a34a44cb-f251-4baf-9f24-7be3e83b984d.jpg?v=1569585569","options":["Title"],"media":[{"alt":"CG Motorsport Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit","id":2565708152943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1440,"width":1440,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_a34a44cb-f251-4baf-9f24-7be3e83b984d.jpg?v=1569585569"},"aspect_ratio":1.0,"height":1440,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/620_a34a44cb-f251-4baf-9f24-7be3e83b984d.jpg?v=1569585569","width":1440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport Solid Mass Flywheel Conversion Kit with Stage 2 Kev-Tek Clutch Kit \u003c\/h4\u003e\n\n\u003cp\u003e The Kev-Tek clutch kit has a very high burst strength material and good heat dissipation qualities to withstand tuned and remapped cars. \u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e High burst strength Kev-Tek material Allows for an increase in stock torque up to 30%* \u003c\/li\u003e\n\u003cli\u003e Smooth engagement and an extended life with Kev-TEK material \u003c\/li\u003e\n\u003cli\u003e Will allow much more aggressive driving and gear changes \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Sports feel, but still suitable for road use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cli\u003e Where applicable we have modified the flywheel so it can take the cage of our sprung Kev-Tek drive plate. Ensuring the dampening effect of the standard Dual Mass Flywheel can be transferred to the sprung drive plate found in CG Motorsport Clutch Kits. \u003c\/li\u003e\n\u003cp\u003e A 500 mile break in is recommended with this kit.\u003c\/p\u003e \n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the clutch for-mations we offer here at CG Motorsport or for more information on this range.\u003c\/p\u003e\n \u003cp\u003e You may experience some harmonically transmitted noises when installing this kit. These noises are completely normal and do not affect the running or longevity of the clutch, flywheel or any other part on the vehicle. This flywheel can and will produce harmonic transmitted noises, this is dependent on if the vehicle has a fly-wheel bearing fitted. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel. \u003c\/p\u003e \u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003e* These kits do not include a Concentric Slave Cylinder. \u003c\/p\u003e\n\n \u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\n\n"}