- CG MotorsportHome
- Products
- Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel
{"tags":["1.8 Turbo 20v AJQ-ARY","1.8 Turbo 20v AJQ-ARY-AUQ Engine Codes-Chassis Number from 175001","1.8 Turbo 20v AJQ-ARY-AUQ Engine Codes-Chassis Number to 175000","1.8i 20v GTi Turbo-AUQ Engines-150BHP","1.8i 20v Turbo 4x4 Inc Quattro BAM-AMK-APY 1998-2003 Models","1.8i 20v Turbo BAM-APX-AJQ-ARY Engine Codes 1998-2003","1.8i 20v Turbo September 2000 on-APP-AUQ-AMU Engine Codes","1.8i Cupra R-20v Inc 4x4-BAM AJQ","1.9 TDi 130 & 150-Codes ASZ-ARL","1.9 TDi 130 Engine Code ASZ","1.9 TDi 130 Engine Code ASZ-BLT","1.9 TDi 131 & 150-Codes ASZ-ARL","1.9 TDi ASZ Engine Code (Fitted LUK Flywheel)","1.9 TDi ASZ Engine Code (Fitted Sachs Flywheel)","1.9TDi 4-Motion ARL-ASZ(97>2006)","1.9TDi ASZ-BLT (2002>)","1.9TDi ASZ-BLT(2005>)","2.8 24V 6 Speed Engine Code B284R","2.8 Turbo VXR-OPC-Z28NET","2.8 V6 B284 Engine Code 250BHP Model","2.8 VXR Nav Turbo 4x4 A28NER","6L11.9 Cupra R TDi 160 Engine Code BPX","9-3","A3-8L","A3-8L Quattro Models","Audi","Bora","Cordoba","Fabia MK1","Golf IV","Golf MK 4","Ibiza MK4","Insignia","Leon MK1","Oktavia MK1","Polo","Polo MK4","S3","Saab","Seat","Skoda","TT","TT Quattro","Toledo MK2","Twin Plate Clutch Kit and Flywheel","Type_555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Vauxhall","Vectra MK2","Volkswagen"]}
Select Make
- Alfa Romeo431
- Alfa Romeo432
- Audi1653
- Big Brake Kit0
- BMW860
- Brake Pads45
- Citroen402
- Daihatsu0
- Fiat504
- Flash Sale23
Filter
Type
Clear
- 1.8i 16v R
- 2.0 16v S Engine Code K20A3
- RB26-Pull Clutch
- R-K20 Engine EP3
- 101 Series Racing Drive Plate Only
- 385 Series Sport Clutch Kit
- 385 Series Supersport Clutch Kit
- 425 Series Supersport Clutch Kit
- 555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel 4
- 555 Series Organic Twin Plate Supersport Clutch Kit
- 555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel 4
- 555 Series Twin Plate Supersport Clutch Kit with Flywheel 31
- 666 Organic Lucky Devil Race Clutch and Flywheel
- 777 Ceramic Lucky Devil Race Clutch and Flywheel
- 888 Series 184 Supersport Race Single Plate Clutch Kit with Flywheel
- 888 Series 184 Supersport Race Triple Plate Clutch Kit with Flywheel
- 888 Series 184 Supersport Race Twin Plate Clutch Kit with Flywheel
- 888 Series Twin Plate 184 Supersport Clutch Kit with Flywheel
- Brake Pads
- Clutch and Flywheel 31
- Clutch Cover Only. Rebuild
- Clutch Kits
- Drive Plate Only
- Dual Friction Drive Plate Only
- Dual Friction Performance Clutch Kit
- Dual Mass Flywheel Only
- Flywheel Only
- Kevtek Drive Plate Only
- Lightened and Balanced 184mm Race Flywheel Only
- Lightened and Balanced Flywheel Only
- Paddle Drive Plate Only
- Performance Clutch Kits
- Replacement 184mm Sintered 2.6mm Twin Disc Drive Plate Only
- Replacement Ceramic 7.1mm Thick Twin Disc Drive Plate Only
- Replacement Ceramic 7.1mm Twin Disc Drive Plate Only
- Solid Mass Flywheel Conversion Kit
- Solid Mass Flywheel Conversion Kit with Dual Friction Plus Clutch Kit
- Solid Mass Flywheel Conversion Kit with Exclusive Dual Friction Clutch Kit
- Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit
- Stage 1 Performance Clutch Kits
- Stage 2 Performance Clutch Kits
- Stage 3 Performance Clutch Kits
- Standard Clutch Kit
- Twin Plate Clutch Kit
- Twin Plate Clutch Kit and Flywheel 23
Your Vehicle: Products | Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel | Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel
Change your vehicle
All 31 results
View
Filter
Type
Clear
- 1.8i 16v R
- 2.0 16v S Engine Code K20A3
- RB26-Pull Clutch
- R-K20 Engine EP3
- 101 Series Racing Drive Plate Only
- 385 Series Sport Clutch Kit
- 385 Series Supersport Clutch Kit
- 425 Series Supersport Clutch Kit
- 555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel
- 555 Series Organic Twin Plate Supersport Clutch Kit
- 555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel
- 555 Series Twin Plate Supersport Clutch Kit with Flywheel
- 666 Organic Lucky Devil Race Clutch and Flywheel
- 777 Ceramic Lucky Devil Race Clutch and Flywheel
- 888 Series 184 Supersport Race Single Plate Clutch Kit with Flywheel
- 888 Series 184 Supersport Race Triple Plate Clutch Kit with Flywheel
- 888 Series 184 Supersport Race Twin Plate Clutch Kit with Flywheel
- 888 Series Twin Plate 184 Supersport Clutch Kit with Flywheel
- Brake Pads
- Clutch and Flywheel
- Clutch Cover Only. Rebuild
- Clutch Kits
- Drive Plate Only
- Dual Friction Drive Plate Only
- Dual Friction Performance Clutch Kit
- Dual Mass Flywheel Only
- Flywheel Only
- Kevtek Drive Plate Only
- Lightened and Balanced 184mm Race Flywheel Only
- Lightened and Balanced Flywheel Only
- Paddle Drive Plate Only
- Performance Clutch Kits
- Replacement 184mm Sintered 2.6mm Twin Disc Drive Plate Only
- Replacement Ceramic 7.1mm Thick Twin Disc Drive Plate Only
- Replacement Ceramic 7.1mm Twin Disc Drive Plate Only
- Solid Mass Flywheel Conversion Kit
- Solid Mass Flywheel Conversion Kit with Dual Friction Plus Clutch Kit
- Solid Mass Flywheel Conversion Kit with Exclusive Dual Friction Clutch Kit
- Solid Mass Flywheel Conversion Kit with Kev-Tek Clutch Kit
- Stage 1 Performance Clutch Kits
- Stage 2 Performance Clutch Kits
- Stage 3 Performance Clutch Kits
- Standard Clutch Kit
- Twin Plate Clutch Kit
- Twin Plate Clutch Kit and Flywheel
{"id":7013059264707,"title":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Saab 9-3\t2.8 V6 B284 Engine Code 250BHP Model","handle":"555-series-ceramic-twin-plate-supersport-clutch-kit-with-flywheel-for-saab-9-3-2-8-v6-b284-engine-code-250bhp-model","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e","published_at":"2021-11-02T12:47:50+00:00","created_at":"2021-11-02T12:47:50+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 V6 B284 Engine Code 250BHP Model","9-3","Saab","Twin Plate Clutch Kit and Flywheel","Type_555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41056008863939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-0563","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Saab 9-3\t2.8 V6 B284 Engine Code 250BHP Model","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_63e51a21-7643-445e-a8c8-2067076f7ad1.jpg?v=1635857272"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_63e51a21-7643-445e-a8c8-2067076f7ad1.jpg?v=1635857272","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":22560039928003,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_63e51a21-7643-445e-a8c8-2067076f7ad1.jpg?v=1635857272"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_63e51a21-7643-445e-a8c8-2067076f7ad1.jpg?v=1635857272","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e"}
{"id":6737047683267,"title":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Saab 9-3 2.8 24V 6 Speed Engine Code B284R","handle":"555-series-ceramic-twin-plate-supersport-clutch-kit-with-flywheel-for-saab-9-3-2-8-24v-6-speed-engine-code-b284r","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e","published_at":"2021-06-16T13:38:33+01:00","created_at":"2021-06-16T13:38:33+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 24V 6 Speed Engine Code B284R","9-3","Saab","Twin Plate Clutch Kit and Flywheel","Type_555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40006644826307,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-0557","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Saab 9-3 2.8 24V 6 Speed Engine Code B284R","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_c45c79be-ea32-4934-8947-fadc47378eb6.jpg?v=1623847114"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_c45c79be-ea32-4934-8947-fadc47378eb6.jpg?v=1623847114","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":21081134661827,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_c45c79be-ea32-4934-8947-fadc47378eb6.jpg?v=1623847114"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_c45c79be-ea32-4934-8947-fadc47378eb6.jpg?v=1623847114","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e"}
{"id":6737038082243,"title":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Insignia 2.8 VXR Nav Turbo 4x4 A28NER","handle":"555-series-ceramic-twin-plate-supersport-clutch-kit-with-flywheel-for-vauxhall-opel-insignia-2-8-vxr-nav-turbo-4x4-a28ner","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e","published_at":"2021-06-16T13:33:40+01:00","created_at":"2021-06-16T13:33:40+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 VXR Nav Turbo 4x4 A28NER","Insignia","Twin Plate Clutch Kit and Flywheel","Type_555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Vauxhall"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40006603210947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-1770","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Insignia 2.8 VXR Nav Turbo 4x4 A28NER","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36e3f55-ba4c-436a-9cd0-ca0368757303.jpg?v=1623846821"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36e3f55-ba4c-436a-9cd0-ca0368757303.jpg?v=1623846821","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":21081087115459,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36e3f55-ba4c-436a-9cd0-ca0368757303.jpg?v=1623846821"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36e3f55-ba4c-436a-9cd0-ca0368757303.jpg?v=1623846821","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e"}
{"id":7013057396931,"title":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Vectra Mk2 2.8 Turbo VXR \/ OPC - Z28NET","handle":"555-series-ceramic-twin-plate-supersport-clutch-kit-with-flywheel-for-vauxhall-opel-vectra-mk2-2-8-turbo-vxr-opc-z28net","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e","published_at":"2021-11-02T12:45:28+00:00","created_at":"2021-11-02T12:45:28+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 Turbo VXR-OPC-Z28NET","Twin Plate Clutch Kit and Flywheel","Type_555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Vauxhall","Vectra MK2"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41056004047043,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-0780","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Ceramic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Vectra Mk2 2.8 Turbo VXR \/ OPC - Z28NET","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_0b247279-c3ef-4d05-8282-8690737ee390.jpg?v=1635857130"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_0b247279-c3ef-4d05-8282-8690737ee390.jpg?v=1635857130","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":22560013942979,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_0b247279-c3ef-4d05-8282-8690737ee390.jpg?v=1635857130"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_0b247279-c3ef-4d05-8282-8690737ee390.jpg?v=1635857130","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCG Motorsport 555 Series Twin Plate Ceramic Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates are made from ceramic material\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCeramic Rigid racing drive plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRace feel engagement and an extended life with the ceramic material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e"}
{"id":7013058085059,"title":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Vectra Mk2 2.8 Turbo VXR \/ OPC - Z28NET","handle":"555-series-organic-twin-plate-supersport-clutch-kit-with-flywheel-for-vauxhall-opel-vectra-mk2-2-8-turbo-vxr-opc-z28net","description":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-11-02T12:46:24+00:00","created_at":"2021-11-02T12:46:24+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 Turbo VXR-OPC-Z28NET","Twin Plate Clutch Kit and Flywheel","Type_555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Vauxhall","Vectra MK2"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41056006308035,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0780","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Vectra Mk2 2.8 Turbo VXR \/ OPC - Z28NET","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36f2ece-82b3-4847-9b35-782535ee653c.jpg?v=1635857185"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36f2ece-82b3-4847-9b35-782535ee653c.jpg?v=1635857185","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":22560023969987,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36f2ece-82b3-4847-9b35-782535ee653c.jpg?v=1635857185"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_e36f2ece-82b3-4847-9b35-782535ee653c.jpg?v=1635857185","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":7013060477123,"title":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Saab\t9-3 2.8 V6 B284 Engine Code 250BHP Model","handle":"555-series-organic-twin-plate-supersport-clutch-kit-with-flywheel-for-saab-9-3-2-8-v6-b284-engine-code-250bhp-model","description":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-11-02T12:49:15+00:00","created_at":"2021-11-02T12:49:16+00:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 V6 B284 Engine Code 250BHP Model","9-3","Saab","Twin Plate Clutch Kit and Flywheel","Type_555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41056011714755,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0563","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Saab\t9-3 2.8 V6 B284 Engine Code 250BHP Model","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_f44522a5-390d-43a0-8560-4053061493a7.jpg?v=1635857357"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_f44522a5-390d-43a0-8560-4053061493a7.jpg?v=1635857357","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":22560053985475,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_f44522a5-390d-43a0-8560-4053061493a7.jpg?v=1635857357"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_f44522a5-390d-43a0-8560-4053061493a7.jpg?v=1635857357","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":6737041653955,"title":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Saab 9-3 2.8 24V 6 Speed Engine Code B284R","handle":"555-series-organic-twin-plate-supersport-clutch-kit-with-flywheel-for-vauxhall-opel-insignia-2-8-vxr-nav-turbo-4x4-a28ner-1","description":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-06-16T13:35:46+01:00","created_at":"2021-06-16T13:35:46+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 24V 6 Speed Engine Code B284R","9-3","Saab","Twin Plate Clutch Kit and Flywheel","Type_555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40006609469635,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0557","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Saab 9-3 2.8 24V 6 Speed Engine Code B284R","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_4ab435ef-c6d4-4438-b801-bfd9cfbb132c.jpg?v=1623846947"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_4ab435ef-c6d4-4438-b801-bfd9cfbb132c.jpg?v=1623846947","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":21081100583107,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_4ab435ef-c6d4-4438-b801-bfd9cfbb132c.jpg?v=1623846947"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225_4ab435ef-c6d4-4438-b801-bfd9cfbb132c.jpg?v=1623846947","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":6737037197507,"title":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Insignia 2.8 VXR Nav Turbo 4x4 A28NER","handle":"555-series-organic-twin-plate-supersport-clutch-kit-with-flywheel-for-vauxhall-opel-insignia-2-8-vxr-nav-turbo-4x4-a28ner","description":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-06-28T10:49:21+01:00","created_at":"2021-06-16T13:33:06+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel, Twin Plate Clutch Kit and Flywheel","tags":["2.8 VXR Nav Turbo 4x4 A28NER","Insignia","Twin Plate Clutch Kit and Flywheel","Type_555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Vauxhall"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40006601310403,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-1770","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Organic Twin Plate Supersport Clutch Kit with Flywheel for Vauxhall \/ Opel Insignia 2.8 VXR Nav Turbo 4x4 A28NER","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225.jpg?v=1623846788"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225.jpg?v=1623846788","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":21081083805891,"position":1,"preview_image":{"aspect_ratio":1.099,"height":729,"width":801,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225.jpg?v=1623846788"},"aspect_ratio":1.099,"height":729,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555O-FLY225.jpg?v=1623846788","width":801}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCG Motorsport 555 Series Twin Plate Supersport Clutch Kit with flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased.\u003c\/p\u003e\n\u003cp\u003eThe clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material.\u003c\/p\u003e\n\u003cp\u003eThe clutch kit assembly can also be used with Cerametallic drive plates for track day use.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003eHigh strength cover\u003c\/li\u003e\n\u003cli\u003eHigh lift side straps\u003c\/li\u003e\n\u003cli\u003eHeavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003eDesigned for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e550 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003eOrganic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003ePerfect for heavily tuned cars that are daily driven.\u003c\/li\u003e\n\u003cli\u003eWeighted precisely to ensure decisive gear changes and increased acceleration.\u003c\/li\u003e\n\u003cli\u003ePreserves low end torque and driveability.\u003c\/li\u003e\n\u003cli\u003eRace feel engagement and an extended life with the organic full face material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003ePlease Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003eCG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003eA 500 mile break in is recommended with this clutch. .\u003c\/p\u003e\n\u003cp\u003eAlso please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease provide vehicle registration at checkout\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":4138085843055,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi TT Quattro 1.8i 20v Turbo BAM \/ APX \/ AJQ \/ ARY Engine Codes 1998-2003","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0108","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:12+00:00","created_at":"2019-09-27T09:49:01+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8i 20v Turbo BAM-APX-AJQ-ARY Engine Codes 1998-2003","Audi","TT Quattro","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781573743,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0108","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi TT Quattro 1.8i 20v Turbo BAM \/ APX \/ AJQ \/ ARY Engine Codes 1998-2003","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_5df17e71-6178-481e-89b7-8041c8b63d88.jpg?v=1569574142"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_5df17e71-6178-481e-89b7-8041c8b63d88.jpg?v=1569574142","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464785007,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_5df17e71-6178-481e-89b7-8041c8b63d88.jpg?v=1569574142"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_5df17e71-6178-481e-89b7-8041c8b63d88.jpg?v=1569574142","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085482607,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L 1.8 Turbo 20v AJQ \/ ARY \/ AUQ Engine Codes - Chassis Number from 175001","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0046","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:09+00:00","created_at":"2019-09-27T09:48:53+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8 Turbo 20v AJQ-ARY-AUQ Engine Codes-Chassis Number from 175001","A3-8L","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781213295,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0046","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L 1.8 Turbo 20v AJQ \/ ARY \/ AUQ Engine Codes - Chassis Number from 175001","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a430bc6c-91c7-4c36-9b75-fa070eb732da.jpg?v=1569574133"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a430bc6c-91c7-4c36-9b75-fa070eb732da.jpg?v=1569574133","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464293487,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a430bc6c-91c7-4c36-9b75-fa070eb732da.jpg?v=1569574133"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a430bc6c-91c7-4c36-9b75-fa070eb732da.jpg?v=1569574133","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085449839,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L 1.8 Turbo 20v AJQ \/ ARY \/ AUQ Engine Codes - Chassis Number to 175000","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0045","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:09+00:00","created_at":"2019-09-27T09:48:52+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8 Turbo 20v AJQ-ARY-AUQ Engine Codes-Chassis Number to 175000","A3-8L","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781180527,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-0045","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L 1.8 Turbo 20v AJQ \/ ARY \/ AUQ Engine Codes - Chassis Number to 175000","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555.jpg?v=1569574132"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555.jpg?v=1569574132","options":["Title"],"media":[{"alt":"CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464260719,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555.jpg?v=1569574132"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555.jpg?v=1569574132","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085548143,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi A3 - 8L 1.9 TDi ASZ Engine Code","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0050","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:09+00:00","created_at":"2019-09-27T09:48:55+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi ASZ Engine Code (Fitted Sachs Flywheel)","A3-8L","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781278831,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0050","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi A3 - 8L 1.9 TDi ASZ Engine Code","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_c898750f-e246-4726-a7f6-c8bbd883de1a.jpg?v=1569574135"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_c898750f-e246-4726-a7f6-c8bbd883de1a.jpg?v=1569574135","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464424559,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_c898750f-e246-4726-a7f6-c8bbd883de1a.jpg?v=1569574135"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_c898750f-e246-4726-a7f6-c8bbd883de1a.jpg?v=1569574135","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085580911,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L 1.9 TDi ASZ Engine Code","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0051","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:10+00:00","created_at":"2019-09-27T09:48:55+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi ASZ Engine Code (Fitted LUK Flywheel)","A3-8L","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781311599,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-0051","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L 1.9 TDi ASZ Engine Code","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a56f651a-120c-43fd-b58b-afb619af2d6f.jpg?v=1569574136"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a56f651a-120c-43fd-b58b-afb619af2d6f.jpg?v=1569574136","options":["Title"],"media":[{"alt":"CG Motorsport 555 Series Twin Plate Supersport Clutch Kit and Flywheel","id":2565464457327,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a56f651a-120c-43fd-b58b-afb619af2d6f.jpg?v=1569574136"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a56f651a-120c-43fd-b58b-afb619af2d6f.jpg?v=1569574136","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085613679,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L Quattro Models\t1.8 Turbo 20v AJQ \/ ARY","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0055","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:10+00:00","created_at":"2019-09-27T09:48:56+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8 Turbo 20v AJQ-ARY","A3-8L Quattro Models","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781344367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0055","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L Quattro Models\t1.8 Turbo 20v AJQ \/ ARY","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3de4fae4-d7b5-4822-9685-f45ff93cd66a.jpg?v=1569574137"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3de4fae4-d7b5-4822-9685-f45ff93cd66a.jpg?v=1569574137","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464490095,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3de4fae4-d7b5-4822-9685-f45ff93cd66a.jpg?v=1569574137"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3de4fae4-d7b5-4822-9685-f45ff93cd66a.jpg?v=1569574137","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085679215,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L Quattro Models 1.9 TDi ASZ Engine Code","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0059","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:10+00:00","created_at":"2019-09-27T09:48:58+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi ASZ Engine Code (Fitted Sachs Flywheel)","A3-8L Quattro Models","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781409903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0059","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L Quattro Models 1.9 TDi ASZ Engine Code","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_686e7e5a-5cf8-42d7-bd0e-062eeac3fdf8.jpg?v=1569574138"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_686e7e5a-5cf8-42d7-bd0e-062eeac3fdf8.jpg?v=1569574138","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464555631,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_686e7e5a-5cf8-42d7-bd0e-062eeac3fdf8.jpg?v=1569574138"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_686e7e5a-5cf8-42d7-bd0e-062eeac3fdf8.jpg?v=1569574138","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085711983,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L Quattro Models 1.9 TDi ASZ Engine Code","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0060","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:11+00:00","created_at":"2019-09-27T09:48:59+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi ASZ Engine Code (Fitted LUK Flywheel)","A3-8L Quattro Models","Audi","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781442671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Audi A3 - 8L Quattro Models 1.9 TDi ASZ Engine Code","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_eee436d4-942e-40c9-b16d-85373d01faba.jpg?v=1569574139"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_eee436d4-942e-40c9-b16d-85373d01faba.jpg?v=1569574139","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464588399,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_eee436d4-942e-40c9-b16d-85373d01faba.jpg?v=1569574139"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_eee436d4-942e-40c9-b16d-85373d01faba.jpg?v=1569574139","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085744751,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi S3 1.8i 20v Turbo 4x4 Inc Quattro BAM \/ AMK \/ APY - 1998-2003 Models","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0102","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:11+00:00","created_at":"2019-09-27T09:48:59+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8i 20v Turbo 4x4 Inc Quattro BAM-AMK-APY 1998-2003 Models","Audi","S3","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781475439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0102","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi S3 1.8i 20v Turbo 4x4 Inc Quattro BAM \/ AMK \/ APY - 1998-2003 Models","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a6389d0e-e2b7-4f15-9fd0-b1482c9b4daf.jpg?v=1569574140"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a6389d0e-e2b7-4f15-9fd0-b1482c9b4daf.jpg?v=1569574140","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464621167,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a6389d0e-e2b7-4f15-9fd0-b1482c9b4daf.jpg?v=1569574140"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_a6389d0e-e2b7-4f15-9fd0-b1482c9b4daf.jpg?v=1569574140","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085810287,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi TT 1.8i 20v Turbo September 2000 on - APP \/ AUQ \/ AMU Engine Codes","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0107","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:11+00:00","created_at":"2019-09-27T09:49:00+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8i 20v Turbo September 2000 on-APP-AUQ-AMU Engine Codes","Audi","TT","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781540975,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0107","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Audi TT 1.8i 20v Turbo September 2000 on - APP \/ AUQ \/ AMU Engine Codes","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cff088b5-03ee-41cb-be4a-f13f1ff45cbe.jpg?v=1569574141"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cff088b5-03ee-41cb-be4a-f13f1ff45cbe.jpg?v=1569574141","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464719471,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cff088b5-03ee-41cb-be4a-f13f1ff45cbe.jpg?v=1569574141"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cff088b5-03ee-41cb-be4a-f13f1ff45cbe.jpg?v=1569574141","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138085974127,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Cordoba 1.9TDi ASZ-BLT (2002\u003e)","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-1572","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:12+00:00","created_at":"2019-09-27T09:49:05+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9TDi ASZ-BLT (2002\u003e)","Cordoba","Seat","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781704815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-1572","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Cordoba 1.9TDi ASZ-BLT (2002\u003e)","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cf790f9a-f5df-46d2-8dbe-6e6ef8f6da8a.jpg?v=1569574145"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cf790f9a-f5df-46d2-8dbe-6e6ef8f6da8a.jpg?v=1569574145","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565464916079,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cf790f9a-f5df-46d2-8dbe-6e6ef8f6da8a.jpg?v=1569574145"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_cf790f9a-f5df-46d2-8dbe-6e6ef8f6da8a.jpg?v=1569574145","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086105199,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Ibiza IV 6L1 1.9 Cupra R TDi 160 Engine Code BPX","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0583","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:12+00:00","created_at":"2019-09-27T09:49:08+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["6L11.9 Cupra R TDi 160 Engine Code BPX","Ibiza MK4","Seat","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781835887,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0583","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Ibiza IV 6L1 1.9 Cupra R TDi 160 Engine Code BPX","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58d1a475-5f01-41dc-ad58-a0bc993061d0.jpg?v=1569574148"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58d1a475-5f01-41dc-ad58-a0bc993061d0.jpg?v=1569574148","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465047151,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58d1a475-5f01-41dc-ad58-a0bc993061d0.jpg?v=1569574148"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58d1a475-5f01-41dc-ad58-a0bc993061d0.jpg?v=1569574148","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086137967,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Leon Mk1 1.8i Cupra R \/ 20v Inc 4x4 - BAM AJQ","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0589","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:13+00:00","created_at":"2019-09-27T09:49:09+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8i Cupra R-20v Inc 4x4-BAM AJQ","Leon MK1","Seat","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781868655,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0589","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Leon Mk1 1.8i Cupra R \/ 20v Inc 4x4 - BAM AJQ","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_caf10ae1-97e6-4b77-833c-7a0ece043a77.jpg?v=1569574149"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_caf10ae1-97e6-4b77-833c-7a0ece043a77.jpg?v=1569574149","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465079919,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_caf10ae1-97e6-4b77-833c-7a0ece043a77.jpg?v=1569574149"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_caf10ae1-97e6-4b77-833c-7a0ece043a77.jpg?v=1569574149","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086170735,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Leon Mk1 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0593","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:13+00:00","created_at":"2019-09-27T09:49:10+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 130 \u0026 150-Codes ASZ-ARL","Leon MK1","Seat","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269781901423,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0593","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Leon Mk1 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_17817aa4-b6ee-4da3-802e-17d10b5aac63.jpg?v=1569574150"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_17817aa4-b6ee-4da3-802e-17d10b5aac63.jpg?v=1569574150","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465112687,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_17817aa4-b6ee-4da3-802e-17d10b5aac63.jpg?v=1569574150"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_17817aa4-b6ee-4da3-802e-17d10b5aac63.jpg?v=1569574150","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086334575,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Toledo Mk2 1.9 TDi 131 \u0026 150 - Codes ASZ \/ ARL","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0604","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:13+00:00","created_at":"2019-09-27T09:49:14+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 131 \u0026 150-Codes ASZ-ARL","Seat","Toledo MK2","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782065263,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0604","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Seat Toledo Mk2 1.9 TDi 131 \u0026 150 - Codes ASZ \/ ARL","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f8376bee-59e9-4229-9f01-1b3e9b6e5520.jpg?v=1569574154"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f8376bee-59e9-4229-9f01-1b3e9b6e5520.jpg?v=1569574154","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465309295,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f8376bee-59e9-4229-9f01-1b3e9b6e5520.jpg?v=1569574154"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f8376bee-59e9-4229-9f01-1b3e9b6e5520.jpg?v=1569574154","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086432879,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Skoda Fabia Mk1 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0628","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:14+00:00","created_at":"2019-09-27T09:49:16+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 130 \u0026 150-Codes ASZ-ARL","Fabia MK1","Skoda","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782163567,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0628","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Skoda Fabia Mk1 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_228555fa-c7c8-4fea-a451-7ad68a5ca490.jpg?v=1569574156"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_228555fa-c7c8-4fea-a451-7ad68a5ca490.jpg?v=1569574156","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465407599,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_228555fa-c7c8-4fea-a451-7ad68a5ca490.jpg?v=1569574156"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_228555fa-c7c8-4fea-a451-7ad68a5ca490.jpg?v=1569574156","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086465647,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Skoda Octavia Mk1 1.9 TDi 130 Engine Code ASZ","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0635","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:14+00:00","created_at":"2019-09-27T09:49:17+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 130 Engine Code ASZ","Oktavia MK1","Skoda","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782196335,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0635","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Skoda Octavia Mk1 1.9 TDi 130 Engine Code ASZ","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_22cdc9b4-fb17-477e-bef9-b7aa78cd9e4d.jpg?v=1569574157"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_22cdc9b4-fb17-477e-bef9-b7aa78cd9e4d.jpg?v=1569574157","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465440367,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_22cdc9b4-fb17-477e-bef9-b7aa78cd9e4d.jpg?v=1569574157"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_22cdc9b4-fb17-477e-bef9-b7aa78cd9e4d.jpg?v=1569574157","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086531183,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Bora 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0806","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:14+00:00","created_at":"2019-09-27T09:49:18+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 130 \u0026 150-Codes ASZ-ARL","Bora","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Volkswagen"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782261871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0806","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Bora 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58bdb437-c2ae-4853-9edd-fd5628a71758.jpg?v=1569574158"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58bdb437-c2ae-4853-9edd-fd5628a71758.jpg?v=1569574158","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465538671,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58bdb437-c2ae-4853-9edd-fd5628a71758.jpg?v=1569574158"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_58bdb437-c2ae-4853-9edd-fd5628a71758.jpg?v=1569574158","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086596719,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Golf Mk 4 1.8i 20v GTi Turbo - AUQ Engines -","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0826","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:15+00:00","created_at":"2019-09-27T09:49:20+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.8i 20v GTi Turbo-AUQ Engines-150BHP","Golf MK 4","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Volkswagen"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782327407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0826","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Golf Mk 4 1.8i 20v GTi Turbo - AUQ Engines -","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_abfdceb2-8747-46b4-8949-c667950814dc.jpg?v=1569574161"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_abfdceb2-8747-46b4-8949-c667950814dc.jpg?v=1569574161","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465604207,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_abfdceb2-8747-46b4-8949-c667950814dc.jpg?v=1569574161"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_abfdceb2-8747-46b4-8949-c667950814dc.jpg?v=1569574161","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086662255,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Golf Mk 4 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0829","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:15+00:00","created_at":"2019-09-27T09:49:21+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 130 \u0026 150-Codes ASZ-ARL","Golf MK 4","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Volkswagen"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782392943,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0829","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Golf Mk 4 1.9 TDi 130 \u0026 150 - Codes ASZ \/ ARL","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f57c5051-23cb-49c7-a0f3-3df932213388.jpg?v=1569574162"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f57c5051-23cb-49c7-a0f3-3df932213388.jpg?v=1569574162","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465669743,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f57c5051-23cb-49c7-a0f3-3df932213388.jpg?v=1569574162"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_f57c5051-23cb-49c7-a0f3-3df932213388.jpg?v=1569574162","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086727791,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Golf MK4 1.9TDi 4-Motion ARL-ASZ(97\u003e2006)","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-1823","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:15+00:00","created_at":"2019-09-27T09:49:23+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9TDi 4-Motion ARL-ASZ(97\u003e2006)","Golf IV","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Volkswagen"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782458479,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-1823","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel For Volkswagen Golf MK4 1.9TDi 4-Motion ARL-ASZ(97\u003e2006)","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_b55e8e41-258b-47cc-be4e-b5baff32eb1a.jpg?v=1569574163"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_b55e8e41-258b-47cc-be4e-b5baff32eb1a.jpg?v=1569574163","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465702511,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_b55e8e41-258b-47cc-be4e-b5baff32eb1a.jpg?v=1569574163"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_b55e8e41-258b-47cc-be4e-b5baff32eb1a.jpg?v=1569574163","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086793327,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Volkswagen Polo 1.9TDi ASZ-BLT(2005\u003e)","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-1882","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:16+00:00","created_at":"2019-09-27T09:49:24+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9TDi ASZ-BLT(2005\u003e)","Polo","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Volkswagen"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782524015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555O-0858","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Volkswagen Polo 1.9TDi ASZ-BLT(2005\u003e)","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3bd6e84b-e483-4e5c-b56e-85b742bced5d.jpg?v=1569574164"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3bd6e84b-e483-4e5c-b56e-85b742bced5d.jpg?v=1569574164","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465800815,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3bd6e84b-e483-4e5c-b56e-85b742bced5d.jpg?v=1569574164"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_3bd6e84b-e483-4e5c-b56e-85b742bced5d.jpg?v=1569574164","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}
{"id":4138086858863,"title":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Volkswagen Polo Mk IV 1.9 TDi 130 Engine Code ASZ \/ BLT","handle":"cg-motorsport-555-series-twin-plate-supersport-clutch-kit-with-flywheel-555-0858","description":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n","published_at":"2022-01-25T11:03:16+00:00","created_at":"2019-09-27T09:49:25+01:00","vendor":"CG Motorsport","type":"Clutch and Flywheel , Twin Plate Clutch Kit and Flywheel","tags":["1.9 TDi 130 Engine Code ASZ-BLT","Polo MK4","Type_555 Series Twin Plate Supersport Clutch Kit with Flywheel","Type_Clutch and Flywheel","Type_Twin Plate Clutch Kit and Flywheel","Volkswagen"],"price":104900,"price_min":104900,"price_max":104900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30269782556783,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"555C-0858","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"555 Series Twin Plate Supersport Clutch Kit with Flywheel for Volkswagen Polo Mk IV 1.9 TDi 130 Engine Code ASZ \/ BLT","public_title":null,"options":["Default Title"],"price":104900,"weight":15000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_e48eb733-1c56-4b21-b35a-c610734ca88a.jpg?v=1569574165"],"featured_image":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_e48eb733-1c56-4b21-b35a-c610734ca88a.jpg?v=1569574165","options":["Title"],"media":[{"alt":"CG Motorsport Ceramic 555 Series Twin Plate Supersport Clutch Kit with Flywheel","id":2565465833583,"position":1,"preview_image":{"aspect_ratio":1.009,"height":1124,"width":1134,"src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_e48eb733-1c56-4b21-b35a-c610734ca88a.jpg?v=1569574165"},"aspect_ratio":1.009,"height":1124,"media_type":"image","src":"\/\/clutch-specialists.co.uk\/cdn\/shop\/products\/555_e48eb733-1c56-4b21-b35a-c610734ca88a.jpg?v=1569574165","width":1134}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e CG Motorsport 555 Series Twin Plate Supersport Clutch Kit with Flywheel\u003c\/h4\u003e\n\n\u003cp\u003e CG Motorsport 555 twin plate Clutch kit assemblies have been designed for use on standard fast road\/track day vehicles that have had their BHP and torque heavily increased. \u003c\/p\u003e\n\u003cp\u003e The clutch cover is a high grade aluminium design. A compact one-piece aluminium alloy construction for strength and has better heat dissipation to enable the clutch to function more efficiently. The intermediate plates are of high grade EN24 steel. The 2 drive plates have 550 BHP HD1 racing material. \u003c\/p\u003e\n\u003cp\u003e The clutch kit assembly can also be used with Cerametallic drive plates for track day use. \u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e Aluminium 60 30 grade cover\u003c\/li\u003e\n\u003cli\u003e High strength cover\u003c\/li\u003e\n\u003cli\u003e High lift side straps\u003c\/li\u003e\n\u003cli\u003e Heavy duty CG Motorsport diaphragm\u003c\/li\u003e\n\u003cli\u003e Designed for low down torque delivery\u003c\/li\u003e\n\u003cli\u003e 650 ft\/lb torque capacity\u003c\/li\u003e\n\u003cli\u003e Organic rigid racing drive plate\u003c\/li\u003e\n\u003cli\u003e Perfect for heavily tuned cars that are daily driven. \u003c\/li\u003e\n\u003cli\u003e Weighted precisely to ensure decisive gear changes and increased acceleration. \u003c\/li\u003e\n\u003cli\u003e Preserves low end torque and driveability. \u003c\/li\u003e\n\u003cli\u003e Race feel engagement and an extended life with the organic full face material. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e As the 555 Series Clutch kit comes with a flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable in motorsport application but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in any way affect the performance of the flywheel.\u003c\/p\u003e\n\u003cp\u003e Please Note - These kits do not include a Concentric Slave Cylinder or flywheel bolts.\u003c\/p\u003e\n\u003cp\u003e CG Motorsport recommends a new slave cylinder is sourced where possible and original flywheel bolts to be used with this kit.\u003c\/p\u003e\n\u003cp\u003e A 500 mile break in is recommended with this clutch.\u003c\/p\u003e\n\u003cp\u003e Please email info@clutch-specialists.co.uk for more information on the 555 SERIES range.\u003c\/p\u003e\n\u003cp\u003e Also please be aware that CG Motorsport uses generic imagery, so please confirm any query with us regarding its exact spec prior to purchase. \u003c\/p\u003e\n\n\u003cp\u003ePlease provide vehicle registration at checkout \u003c\/p\u003e\n\n"}